An hour into a call, your headphones are pressing your glasses into the side of your head, and by evening the arms have left red lines above your ears. With the right type of headphones, softer ear pads and slim arms on your frames, you can get through long sessions without that dull pressure. Wearing headphones with glasses is only half a headphone problem, though: the other half sits on your nose, and most buying guides ignore it.
In short
- It hurts because the ear pad presses the arm of your glasses against your head. The thicker the arm, the worse it gets.
- In-ear and open-ear headphones barely touch the arms; over-ear headphones work well with soft, deep pads.
- On your glasses, thin, straight arms made of titanium or metal make the difference.
- The arm lets air escape under the pad: less bass and weaker noise cancelling.
Why do headphones hurt when you wear glasses?
Headphones hurt because the ear pad presses the arm of your glasses against your head. The arm runs over and behind your ear, right under the edge of the pad. All the clamping force that keeps the headphones in place is concentrated on that thin, hard line. The thicker and more angular the arm, the more you feel it.
Then there’s time. For the first few minutes you barely notice; after an hour, light pressure turns into a nagging ache behind the ear. A woolly hat does exactly the same to your frames. → Which hat to wear with glasses
But not every type of headphones touches the arms at all.
Headphones with glasses: over-ear, on-ear, in-ear or open-ear?
In-ear and open-ear headphones are the easiest choice for glasses wearers, because they barely touch the arms, if at all. If you want the sound and isolation of full-size headphones, go for over-ear models with soft, deep pads. On-ear headphones are the trickiest: the pad sits right on your ear and squeezes it against the arm.
| Type | Pressure on the arms | Sound and isolation | Fit with glasses |
|---|---|---|---|
| Over-ear | medium, depending on pads and clamping force | very good, slightly less bass with glasses | good with soft, deep pads |
| On-ear | high, ear and arm are squeezed together | good, little isolation | often uncomfortable after a short while |
| In-ear | none | good to very good with well-fitting tips | no conflict with the arms |
| Open-ear and bone conduction | low, the hook shares space with the arm | less bass, you still hear your surroundings | usually fine, tight with thick arms |
Rule of thumb: if you need quiet in an open-plan office or on the Tube, over-ear is hard to beat. Then the pads and your glasses decide whether it pinches.
Are open-ear headphones good for glasses wearers?
Yes, for most glasses wearers. Open-ear and bone conduction headphones leave your ear free, so nothing presses the arm against your head. Many models do sit on a hook behind the ear, though, exactly where your glasses arm rests. With thin metal arms the two sit comfortably side by side; with chunky acetate arms it gets crowded.
The trade-off is sound: less bass and no isolation. When you are running, cycling or working from home, that is a plus, because you can still hear traffic, the doorbell or your colleagues. On a train or a plane, you will end up turning the volume right up.
Put your glasses on first, then the headphones. That way the hook sits on the outside and does not push the arm off your ear.
What should you look for in headphones?
Focus on the ear pads and the clamping force. Soft, deep pads let the arm sink in instead of pressing it into your head. Large, oval ear cups leave room for your ear, so it is not squashed against the arm as well. And a headband that only clamps gently makes all the difference in hours two and three.
- Memory foam: it gives way under the arm and closes around it, which reduces both the pressure and the gap.
- Velour instead of faux leather: velour is softer and stays cooler but seals slightly less. Faux leather seals better but gets warm over long sessions.
- Adjustable clamping force: some headbands can be loosened. Otherwise, try them on in the shop with your glasses and keep them on for a good quarter of an hour.
- Cut-outs for glasses: some headsets have pads with a soft channel or an extra-yielding zone for glasses arms. It is worth checking the product description for this.
- Replaceable pads: pads get flatter and harder over time. If you can swap them, your headphones stay comfortable.
Why do headphones sound worse with glasses?
The arm of your glasses lifts the ear pad and leaves a small gap. Air escapes through it, taking some of the bass with it. At the same time, more outside noise gets in, so active noise cancelling works less well. The thinner the arm and the softer the pad, the smaller the gap and the less you will notice.
Try it yourself: play a bass-heavy track, then take your glasses off and put them back on. If the difference is obvious, the arms are to blame. And those you can change.
Which glasses work best under headphones?
Glasses with thin, flat, straight arms work best. Titanium and metal arms are often just 1 to 2 millimetres thick, acetate arms frequently 3 to 5. Every millimetre less means less pressure and a smaller gap under the pad. Wide decorative arms with logos or embellishments are the least suitable choice under headphones.
- Thin and flat: the arm lies close to your head rather than sticking out.
- Straight: if the arm runs flat over the ear and only bends down behind the pad, the curve does not end up under the edge of the pad. An optician can re-bend it.
- Titanium or metal: titanium is light and strong, so even thin arms keep their shape.
- Spring hinges: they flex outwards, so the frame sits with less tension at the temples and does not bend out of shape as quickly when you keep taking your headphones on and off.
Do you usually wear a chunky acetate frame? Then a lightweight second pair with metal arms for your desk and for gaming is often the simplest fix.
Oakley WINGFOLD EVR (OX5118 511803)£100.54
Oakley WINGFOLD EVR (OX5118 511801)£102.64
Oakley WINGFOLD EVR (OX5118 511804)£98.45
Oakley WIRE TAP 2.0 RX (OX5152 515201)£129.35
Ray-Ban RX8725 1028£90.78
Oakley WIRE TAP 2.0 RX (OX5152 515203)£124.17Prices include VAT. Free standard delivery within the UK. Express delivery and other countries: shipping costs.
All titanium glasses →How do you get through long sessions with headphones and glasses?
Three things help on long sessions: regular breaks, fresh ear pads and a few millimetres of adjustment. Take your headphones off for a few minutes roughly every hour. Replace pads that have gone flat. And try wearing the headphones slightly higher or further back, so the pad crosses the arm at a different spot.
- Glasses first, then headphones. The other way round, you push the arm under the pad and it gets wedged.
- Adjust the pads until the arm lies flat underneath and nothing pulls.
- Loosen the headband so the pads just rest against your head.
- Take a short break, at the latest after an hour.
If the frame itself feels tight at the temples, ask an optician to adjust it. A few minutes of work on the arms often makes a noticeable difference.
Office or gaming headset: what is different?
With a headset, comfort over many hours matters more than the last bit of sound quality. For the office, a light headset with velour pads, an in-ear headset or an open-ear model that lets you hear colleagues is often enough. Gaming headsets, on the other hand, are usually over-ear, often heavy and with a firm clamp.
Office: for calls and video meetings, a clear microphone matters more than bass. A light model will then see you through a whole working day.
Gaming: here the headset often stays on for three or four hours at a stretch. Look for adjustable clamping force, a wide padded headband and pads with cut-outs for glasses. And plan breaks, even when the match is getting tense.
FAQ: headphones for glasses wearers
Are there special headphones for glasses wearers?
Hardly as a category of their own. Some headsets have pads with cut-outs or an extra-yielding zone for the arms. Otherwise, soft, deep pads and gentle clamping force are what count.
Does noise cancelling work with glasses?
Yes, but slightly less well, because the arm leaves a small gap under the pad. With thin metal arms and memory foam, the difference is small.
Can I have my glasses adjusted to fit under headphones?
Partly. An optician can move or flatten the curve behind the ear and loosen the fit at the temples. Thick acetate arms will not get any thinner, though.
Which headphones work with glasses for sport?
In-ear or open-ear models, because both stay put when you run and barely touch the arms. With open-ear, you can still hear traffic outdoors.
Happy with your headphones? Then start with your glasses: the lightweight titanium and metal frames above are a good place to begin.




